{"product_id":"lycon-strip-wax-jars","title":"Lycon Strip Wax Jars","description":"\u003ch2\u003eDescription:\u003c\/h2\u003e \u003ch2\u003e\u003cstrong\u003eActive Gold Strip Wax\u003c\/strong\u003e\u003c\/h2\u003e \u003cp\u003eGlows like gold! Contains the soothing benefits of Chamomile and the finest grade of gold Micro Mica, for gentle and efficient waxing.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHow To Use:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eTo heat jar directly in wax heater, remove lid, place jar in heater, heat to 70-75˚C (158 – 167˚F). At this temperature, the strip wax has a consistency like thin honey, which is the proper working consistency for best performance.\u2028800ml jar only: To heat in microwave, loosen lid, heat jar for 1 minute on HIGH. If not sufficiently melted, heat again in 30-second intervals, until wax is at proper working temperature and consistency. Then either place jar directly in wax heater to maintain working temperature, or empty wax into wax heater insert.\u003c\/li\u003e \u003cli\u003eBefore use, test wax temperature on your own arm. If it feels too hot, allow wax to cool before further use.\u003c\/li\u003e \u003cli\u003eCleanse skin with Lycotane Skin Cleanser and allow skin to dry.\u003c\/li\u003e \u003cli\u003eWith spatula at 90° angle to the skin, apply wax firmly in direction of hair growth.\u003c\/li\u003e \u003cli\u003eTo remove wax, bond a waxing strip firmly in sections to the applied wax. One waxing strip can be rebonded to applied wax several times.\u003c\/li\u003e \u003cli\u003eHold skin taut and pull waxing strip off quickly against hair growth.\u003c\/li\u003e \u003cli\u003eRe-apply and remove wax as necessary until all hair has been removed.\u003c\/li\u003e \u003cli\u003eTo finish, apply Lycotane Skin Cleanser to cleanse skin and to close hair follicles.\u003c\/li\u003e \u003cli\u003eApply Tea-Tree Perfect to soothe, protect and moisturise, as well as remove any possible sticky wax residue.\u003c\/li\u003e \u003cli\u003eUse Wax Solvent to clean wax off equipment, furniture, surfaces and clothes.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eWarning:\u003c\/strong\u003e Discontinue use of this product if any adverse skin reaction occurs. Keep away from eyes. If wax enters the eye, flush well with plenty of clean water and seek medical attention if irritation persists. Microwaves have different wattages. It is important to heat wax gradually to avoid wax overheating. If wax is overheated, the plastic jar may also overheat making it difficult to handle. The jar can actually distort and collapse. Do not handle heated jar with bare hands. Do not expose wax to naked flames. Do not heat wax for an extended period of time in jar over 100˚C (212˚F). If using the Lycon Professional Heater, the heat setting should never be over ‘8’. Be aware that heating temperatures and times may vary depending on the appliance used. Do not apply wax to skin whilst wax is very hot and runny. Only apply wax to skin at about 70 – 75˚C (158 – 167˚F). Do not use wax on sunburnt skin, moles, varicose veins, broken, irritated or inflamed skin.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eKey Ingredients\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eChamomile\u003c\/li\u003e \u003cli\u003eMicro Mica\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eAloe Vera Strip Wax\u003c\/strong\u003e\u003cbr\u003eThe beneficial properties of soothing and cooling Aloe Vera leaves skin silky-smooth and comfortable.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHow To Use:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eTo heat jar directly in wax heater, remove lid, place jar in heater, heat to 70-75˚C (158 – 167˚F). At this temperature, the strip wax has a consistency like thin honey, which is the proper working consistency for best performance.\u2028800ml jar only: To heat in microwave, loosen lid, heat jar for 1 minute on HIGH. If not sufficiently melted, heat again in 30-second intervals, until wax is at proper working temperature and consistency. Then either place jar directly in wax heater to maintain working temperature, or empty wax into wax heater insert.\u003c\/li\u003e \u003cli\u003eBefore use, test wax temperature on your own arm. If it feels too hot, allow wax to cool before further use.\u003c\/li\u003e \u003cli\u003eCleanse skin with Lycotane Skin Cleanser and allow skin to dry.\u003c\/li\u003e \u003cli\u003eWith spatula at 90° angle to the skin, apply wax firmly in direction of hair growth.\u003c\/li\u003e \u003cli\u003eTo remove wax, bond a waxing strip firmly in sections to the applied wax. One waxing strip can be rebonded to applied wax several times.\u003c\/li\u003e \u003cli\u003eHold skin taut and pull waxing strip off quickly against hair growth.\u003c\/li\u003e \u003cli\u003eRe-apply and remove wax as necessary until all hair has been removed.\u003c\/li\u003e \u003cli\u003eTo finish, apply Lycotane Skin Cleanser to cleanse skin and to close hair follicles.\u003c\/li\u003e \u003cli\u003eApply Tea-Tree Perfect to soothe, protect and moisturise, as well as remove any possible sticky wax residue.\u003c\/li\u003e \u003cli\u003eUse Wax Solvent to clean wax off equipment, furniture, surfaces and clothes.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eWarning:\u003c\/strong\u003e Discontinue use of this product if any adverse skin reaction occurs. Keep away from eyes. If wax enters the eye, flush well with plenty of clean water and seek medical attention if irritation persists. Microwaves have different wattages. It is important to heat wax gradually to avoid wax overheating. If wax is overheated, the plastic jar may also overheat making it difficult to handle. The jar can actually distort and collapse. Do not handle heated jar with bare hands. Do not expose wax to naked flames. Do not heat wax for an extended period of time in jar over 100˚C (212˚F). If using the Lycon Professional Heater, the heat setting should never be over ‘8’. Be aware that heating temperatures and times may vary depending on the appliance used. Do not apply wax to skin whilst wax is very hot and runny. Only apply wax to skin at about 70 – 75˚C (158 – 167˚F). Do not use wax on sunburnt skin, moles, varicose veins, broken, irritated or inflamed skin.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eKey Ingredients\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eAloe Vera\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eApricot Strip Wax\u003c\/strong\u003e\u003cbr\u003eThe LYCON original. This famous wax is ultra gentle and super strong. Conditions and nurtures skin while waxing.\u003cbr\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eHow To Use:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eTo heat jar directly in wax heater, remove lid, place jar in heater, heat to 70-75˚C (158 – 167˚F). At this temperature, the strip wax has a consistency like thin honey, which is the proper working consistency for best performance.\u2028800ml jar only: To heat in microwave, loosen lid, heat jar for 1 minute on HIGH. If not sufficiently melted, heat again in 30-second intervals, until wax is at proper working temperature and consistency. Then either place jar directly in wax heater to maintain working temperature, or empty wax into wax heater insert.\u003c\/li\u003e \u003cli\u003eBefore use, test wax temperature on your own arm. If it feels too hot, allow wax to cool before further use.\u003c\/li\u003e \u003cli\u003eCleanse skin with Lycotane Skin Cleanser and allow skin to dry.\u003c\/li\u003e \u003cli\u003eWith spatula at 90° angle to the skin, apply wax firmly in direction of hair growth.\u003c\/li\u003e \u003cli\u003eTo remove wax, bond a waxing strip firmly in sections to the applied wax. One waxing strip can be rebonded to applied wax several times.\u003c\/li\u003e \u003cli\u003eHold skin taut and pull waxing strip off quickly against hair growth.\u003c\/li\u003e \u003cli\u003eRe-apply and remove wax as necessary until all hair has been removed.\u003c\/li\u003e \u003cli\u003eTo finish, apply Lycotane Skin Cleanser to cleanse skin and to close hair follicles.\u003c\/li\u003e \u003cli\u003eApply Tea-Tree Perfect to soothe, protect and moisturise, as well as remove any possible sticky wax residue.\u003c\/li\u003e \u003cli\u003eUse Wax Solvent to clean wax off equipment, furniture, surfaces and clothes.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eWarning:\u003c\/strong\u003e Discontinue use of this product if any adverse skin reaction occurs. Keep away from eyes. If wax enters the eye, flush well with plenty of clean water and seek medical attention if irritation persists. Microwaves have different wattages. It is important to heat wax gradually to avoid wax overheating. If wax is overheated, the plastic jar may also overheat making it difficult to handle. The jar can actually distort and collapse. Do not handle heated jar with bare hands. Do not expose wax to naked flames. Do not heat wax for an extended period of time in jar over 100˚C (212˚F). If using the Lycon Professional Heater, the heat setting should never be over ‘8’. Be aware that heating temperatures and times may vary depending on the appliance used. Do not apply wax to skin whilst wax is very hot and runny. Only apply wax to skin at about 70 – 75˚C (158 – 167˚F). Do not use wax on sunburnt skin, moles, varicose veins, broken, irritated or inflamed skin.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eKey Ingredients\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eApricot Kernel Oil\u003c\/li\u003e \u003cli\u003eChamomile\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eAzulene Strip Wax\u003c\/strong\u003e\u003cbr\u003eExtra gentle wax with soothing properties from Azulene, a calming extract derived from the Chamomile plant.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHow To Use:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eTo heat jar directly in wax heater, remove lid, place jar in heater, heat to 70-75˚C (158 – 167˚F). At this temperature, the strip wax has a consistency like thin honey, which is the proper working consistency for best performance.\u2028800ml jar only: To heat in microwave, loosen lid, heat jar for 1 minute on HIGH. If not sufficiently melted, heat again in 30-second intervals, until wax is at proper working temperature and consistency. Then either place jar directly in wax heater to maintain working temperature, or empty wax into wax heater insert.\u003c\/li\u003e \u003cli\u003eBefore use, test wax temperature on your own arm. If it feels too hot, allow wax to cool before further use.\u003c\/li\u003e \u003cli\u003eCleanse skin with Lycotane Skin Cleanser and allow skin to dry.\u003c\/li\u003e \u003cli\u003eWith spatula at 90° angle to the skin, apply wax firmly in direction of hair growth.\u003c\/li\u003e \u003cli\u003eTo remove wax, bond a waxing strip firmly in sections to the applied wax. One waxing strip can be rebonded to applied wax several times.\u003c\/li\u003e \u003cli\u003eHold skin taut and pull waxing strip off quickly against hair growth.\u003c\/li\u003e \u003cli\u003eRe-apply and remove wax as necessary until all hair has been removed.\u003c\/li\u003e \u003cli\u003eTo finish, apply Lycotane Skin Cleanser to cleanse skin and to close hair follicles.\u003c\/li\u003e \u003cli\u003eApply Tea-Tree Perfect to soothe, protect and moisturise, as well as remove any possible sticky wax residue.\u003c\/li\u003e \u003cli\u003eUse Wax Solvent to clean wax off equipment, furniture, surfaces and clothes.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eWarning:\u003c\/strong\u003e Discontinue use of this product if any adverse skin reaction occurs. Keep away from eyes. If wax enters the eye, flush well with plenty of clean water and seek medical attention if irritation persists. Microwaves have different wattages. It is important to heat wax gradually to avoid wax overheating. If wax is overheated, the plastic jar may also overheat making it difficult to handle. The jar can actually distort and collapse. Do not handle heated jar with bare hands. Do not expose wax to naked flames. Do not heat wax for an extended period of time in jar over 100˚C (212˚F). If using the Lycon Professional Heater, the heat setting should never be over ‘8’. Be aware that heating temperatures and times may vary depending on the appliance used. Do not apply wax to skin whilst wax is very hot and runny. Only apply wax to skin at about 70 – 75˚C (158 – 167˚F). Do not use wax on sunburnt skin, moles, varicose veins, broken, irritated or inflamed skin.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eKey Ingredients\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eChamomile\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eLycoflex Vanilla Strip Wax\u003c\/strong\u003e\u003cbr\u003eSuper creamy and flexible for an amazing gentle feel, with a delightful vanilla scent. Excellent for all sensitive areas.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHow To Use:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eTo heat jar directly in wax heater, remove lid, place jar in heater, heat to 70-75˚C (158 – 167˚F). At this temperature, the strip wax has a consistency like thin honey, which is the proper working consistency for best performance.\u2028800ml jar only: To heat in microwave, loosen lid, heat jar for 1 minute on HIGH. If not sufficiently melted, heat again in 30-second intervals, until wax is at proper working temperature and consistency. Then either place jar directly in wax heater to maintain working temperature, or empty wax into wax heater insert.\u003c\/li\u003e \u003cli\u003eBefore use, test wax temperature on your own arm. If it feels too hot, allow wax to cool before further use.\u003c\/li\u003e \u003cli\u003eCleanse skin with Lycotane Skin Cleanser and allow skin to dry.\u003c\/li\u003e \u003cli\u003eWith spatula at 90° angle to the skin, apply wax firmly in direction of hair growth.\u003c\/li\u003e \u003cli\u003eTo remove wax, bond a waxing strip firmly in sections to the applied wax. One waxing strip can be rebonded to applied wax several times.\u003c\/li\u003e \u003cli\u003eHold skin taut and pull waxing strip off quickly against hair growth.\u003c\/li\u003e \u003cli\u003eRe-apply and remove wax as necessary until all hair has been removed.\u003c\/li\u003e \u003cli\u003eTo finish, apply Lycotane Skin Cleanser to cleanse skin and to close hair follicles.\u003c\/li\u003e \u003cli\u003eApply Tea-Tree Perfect to soothe, protect and moisturise, as well as remove any possible sticky wax residue.\u003c\/li\u003e \u003cli\u003eUse Wax Solvent to clean wax off equipment, furniture, surfaces and clothes.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eWarning:\u003c\/strong\u003e Discontinue use of this product if any adverse skin reaction occurs. Keep away from eyes. If wax enters the eye, flush well with plenty of clean water and seek medical attention if irritation persists. Microwaves have different wattages. It is important to heat wax gradually to avoid wax overheating. If wax is overheated, the plastic jar may also overheat making it difficult to handle. The jar can actually distort and collapse. Do not handle heated jar with bare hands. Do not expose wax to naked flames. Do not heat wax for an extended period of time in jar over 100˚C (212˚F). If using the Lycon Professional Heater, the heat setting should never be over ‘8’. Be aware that heating temperatures and times may vary depending on the appliance used. Do not apply wax to skin whilst wax is very hot and runny. Only apply wax to skin at about 70 – 75˚C (158 – 167˚F). Do not use wax on sunburnt skin, moles, varicose veins, broken, irritated or inflamed skin.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eKey Ingredients\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eTitanium Dioxide\u003c\/li\u003e \u003cli\u003eVanilla Extract\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eLycotec Superberry Strip Wax\u003c\/strong\u003e\u003cbr\u003eNew generation, high-tech, ultra-flexible and creamy pink, berry scented strip wax that creates a super gentle, smooth wax.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHow To Use:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eTo heat jar directly in wax heater, remove lid, place jar in heater, heat to 70-75˚C (158 – 167˚F). At this temperature, the strip wax has a consistency like thin honey, which is the proper working consistency for best performance.\u2028800ml jar only: To heat in microwave, loosen lid, heat jar for 1 minute on HIGH. If not sufficiently melted, heat again in 30-second intervals, until wax is at proper working temperature and consistency. Then either place jar directly in wax heater to maintain working temperature, or empty wax into wax heater insert.\u003c\/li\u003e \u003cli\u003eBefore use, test wax temperature on your own arm. If it feels too hot, allow wax to cool before further use.\u003c\/li\u003e \u003cli\u003eCleanse skin with Lycotane Skin Cleanser and allow skin to dry.\u003c\/li\u003e \u003cli\u003eWith spatula at 90° angle to the skin, apply wax firmly in direction of hair growth.\u003c\/li\u003e \u003cli\u003eTo remove wax, bond a waxing strip firmly in sections to the applied wax. One waxing strip can be rebonded to applied wax several times.\u003c\/li\u003e \u003cli\u003eHold skin taut and pull waxing strip off quickly against hair growth.\u003c\/li\u003e \u003cli\u003eRe-apply and remove wax as necessary until all hair has been removed.\u003c\/li\u003e \u003cli\u003eTo finish, apply Lycotane Skin Cleanser to cleanse skin and to close hair follicles.\u003c\/li\u003e \u003cli\u003eApply Tea-Tree Perfect to soothe, protect and moisturise, as well as remove any possible sticky wax residue.\u003c\/li\u003e \u003cli\u003eUse Wax Solvent to clean wax off equipment, furniture, surfaces and clothes.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eWarning:\u003c\/strong\u003e Discontinue use of this product if any adverse skin reaction occurs. Keep away from eyes. If wax enters the eye, flush well with plenty of clean water and seek medical attention if irritation persists. Microwaves have different wattages. It is important to heat wax gradually to avoid wax overheating. If wax is overheated, the plastic jar may also overheat making it difficult to handle. The jar can actually distort and collapse. Do not handle heated jar with bare hands. Do not expose wax to naked flames. Do not heat wax for an extended period of time in jar over 100˚C (212˚F). If using the Lycon Professional Heater, the heat setting should never be over ‘8’. Be aware that heating temperatures and times may vary depending on the appliance used. Do not apply wax to skin whilst wax is very hot and runny. Only apply wax to skin at about 70 – 75˚C (158 – 167˚F). Do not use wax on sunburnt skin, moles, varicose veins, broken, irritated or inflamed skin.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eKey Ingredients\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eTitanium Dioxide\u003c\/li\u003e \u003cli\u003eMicro Mica\u003c\/li\u003e \u003cli\u003eStrawberry Seed Oil\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eLycotec White Strip Wax\u003c\/strong\u003e\u003cbr\u003eNew generation, high-tech, ultra-flexible and strong white strip wax that creates a super gentle, smooth wax.\u003cbr\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eHow To Use:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eTo heat jar directly in wax heater, remove lid, place jar in heater, heat to 70-75˚C (158 – 167˚F). At this temperature, the strip wax has a consistency like thin honey, which is the proper working consistency for best performance.\u2028800ml jar only: To heat in microwave, loosen lid, heat jar for 1 minute on HIGH. If not sufficiently melted, heat again in 30-second intervals, until wax is at proper working temperature and consistency. Then either place jar directly in wax heater to maintain working temperature, or empty wax into wax heater insert.\u003c\/li\u003e \u003cli\u003eBefore use, test wax temperature on your own arm. If it feels too hot, allow wax to cool before further use.\u003c\/li\u003e \u003cli\u003eCleanse skin with Lycotane Skin Cleanser and allow skin to dry.\u003c\/li\u003e \u003cli\u003eWith spatula at 90° angle to the skin, apply wax firmly in direction of hair growth.\u003c\/li\u003e \u003cli\u003eTo remove wax, bond a waxing strip firmly in sections to the applied wax. One waxing strip can be rebonded to applied wax several times.\u003c\/li\u003e \u003cli\u003eHold skin taut and pull waxing strip off quickly against hair growth.\u003c\/li\u003e \u003cli\u003eRe-apply and remove wax as necessary until all hair has been removed.\u003c\/li\u003e \u003cli\u003eTo finish, apply Lycotane Skin Cleanser to cleanse skin and to close hair follicles.\u003c\/li\u003e \u003cli\u003eApply Tea-Tree Perfect to soothe, protect and moisturise, as well as remove any possible sticky wax residue.\u003c\/li\u003e \u003cli\u003eUse Wax Solvent to clean wax off equipment, furniture, surfaces and clothes.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eWarning:\u003c\/strong\u003e Discontinue use of this product if any adverse skin reaction occurs. Keep away from eyes. If wax enters the eye, flush well with plenty of clean water and seek medical attention if irritation persists. Microwaves have different wattages. It is important to heat wax gradually to avoid wax overheating. If wax is overheated, the plastic jar may also overheat making it difficult to handle. The jar can actually distort and collapse. Do not handle heated jar with bare hands. Do not expose wax to naked flames. Do not heat wax for an extended period of time in jar over 100˚C (212˚F). If using the Lycon Professional Heater, the heat setting should never be over ‘8’. Be aware that heating temperatures and times may vary depending on the appliance used. Do not apply wax to skin whilst wax is very hot and runny. Only apply wax to skin at about 70 – 75˚C (158 – 167˚F). Do not use wax on sunburnt skin, moles, varicose veins, broken, irritated or inflamed skin.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eKey Ingredients\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eTitanium Dioxide\u003c\/li\u003e \u003cli\u003eCoconut Oil\u003c\/li\u003e \u003cli\u003eVanilla\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eManifico Strip Wax\u003c\/strong\u003e\u003cbr\u003eA sparkling non-sticky formula, with Chamomile, Australian Sandalwood and Micro Mica. MANifico Strip Wax is excellent for sensitive skin and strong male hair growth. This gentle formula removes hairs as short as 2mm and can be used thinly and efficiently without skin drag on the legs, chest, backs and arms.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHow To Use:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eTo heat jar directly in wax heater, remove lid, place jar in heater, heat to 70-75˚C (158 – 167˚F). At this temperature, the strip wax has a consistency like thin honey, which is the proper working consistency for best performance.\u2028800ml jar only: To heat in microwave, loosen lid, heat jar for 1 minute on HIGH. If not sufficiently melted, heat again in 30-second intervals, until wax is at proper working temperature and consistency. Then either place jar directly in wax heater to maintain working temperature, or empty wax into wax heater insert.\u003c\/li\u003e \u003cli\u003eBefore use, test wax temperature on your own arm. If it feels too hot, allow wax to cool before further use.\u003c\/li\u003e \u003cli\u003eCleanse skin with MANifico Skin Cleanser and allow skin to dry.\u003c\/li\u003e \u003cli\u003eWith spatula at 90° angle to the skin, apply wax firmly in direction of hair growth.\u003c\/li\u003e \u003cli\u003eTo remove wax, bond a waxing strip firmly in sections to the applied wax. One waxing strip can be rebonded to applied wax several times.\u003c\/li\u003e \u003cli\u003eHold skin taut and pull waxing strip off quickly against hair growth.\u003c\/li\u003e \u003cli\u003eRe-apply and remove wax as necessary until all hair has been removed.\u003c\/li\u003e \u003cli\u003eTo finish, apply MANifico Skin Cleanser to cleanse skin and to close hair follicles.\u003c\/li\u003e \u003cli\u003eApply MANifico Double Action Oil to soothe, protect and moisturise, as well as remove any possible sticky wax residue.\u003c\/li\u003e \u003cli\u003eUse Wax Solvent to clean wax off equipment, furniture, surfaces and clothes.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eWarning:\u003c\/strong\u003e Discontinue use of this product if any adverse skin reaction occurs. Keep away from eyes. If wax enters the eye, flush well with plenty of clean water and seek medical attention if irritation persists. Microwaves have different wattages. It is important to heat wax gradually to avoid wax overheating. If wax is overheated, the plastic jar may also overheat making it difficult to handle. The jar can actually distort and collapse. Do not handle heated jar with bare hands. Do not expose wax to naked flames. Do not heat wax for an extended period of time in jar over 100˚C (212˚F). If using the Lycon Professional Heater, the heat setting should never be over ‘8’. Be aware that heating temperatures and times may vary depending on the appliance used. Do not apply wax to skin whilst wax is very hot and runny. Only apply wax to skin at about 70 – 75˚C (158 – 167˚F). Do not use wax on sunburnt skin, moles, varicose veins, broken, irritated or inflamed skin.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eKey Ingredients\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eMicro Mica\u003c\/li\u003e \u003cli\u003eSweet Almond Oil\u003c\/li\u003e \u003cli\u003eTitanium Dioxide\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eOlive Oil Strip Wax\u003c\/strong\u003e \u003cbr\u003eThis special blend of soothing Virgin Olive Oil and Sweet Almond Oil effectively grips the shortest and most stubborn hairs.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHow To Use:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eTo heat jar directly in wax heater, remove lid, place jar in heater, heat to 70-75˚C (158 – 167˚F). At this temperature, the strip wax has a consistency like thin honey, which is the proper working consistency for best performance.\u2028800ml jar only: To heat in microwave, loosen lid, heat jar for 1 minute on HIGH. If not sufficiently melted, heat again in 30-second intervals, until wax is at proper working temperature and consistency. Then either place jar directly in wax heater to maintain working temperature, or empty wax into wax heater insert.\u003c\/li\u003e \u003cli\u003eBefore use, test wax temperature on your own arm. If it feels too hot, allow wax to cool before further use.\u003c\/li\u003e \u003cli\u003eCleanse skin with Lycotane Skin Cleanser and allow skin to dry.\u003c\/li\u003e \u003cli\u003eWith spatula at 90° angle to the skin, apply wax firmly in direction of hair growth.\u003c\/li\u003e \u003cli\u003eTo remove wax, bond a waxing strip firmly in sections to the applied wax. One waxing strip can be rebonded to applied wax several times.\u003c\/li\u003e \u003cli\u003eHold skin taut and pull waxing strip off quickly against hair growth.\u003c\/li\u003e \u003cli\u003eRe-apply and remove wax as necessary until all hair has been removed.\u003c\/li\u003e \u003cli\u003eTo finish, apply Lycotane Skin Cleanser to cleanse skin and to close hair follicles.\u003c\/li\u003e \u003cli\u003eApply Tea-Tree Perfect to soothe, protect and moisturise, as well as remove any possible sticky wax residue.\u003c\/li\u003e \u003cli\u003eUse Wax Solvent to clean wax off equipment, furniture, surfaces and clothes.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eWarning:\u003c\/strong\u003e Discontinue use of this product if any adverse skin reaction occurs. Keep away from eyes. If wax enters the eye, flush well with plenty of clean water and seek medical attention if irritation persists. Microwaves have different wattages. It is important to heat wax gradually to avoid wax overheating. If wax is overheated, the plastic jar may also overheat making it difficult to handle. The jar can actually distort and collapse. Do not handle heated jar with bare hands. Do not expose wax to naked flames. Do not heat wax for an extended period of time in jar over 100˚C (212˚F). If using the Lycon Professional Heater, the heat setting should never be over ‘8’. Be aware that heating temperatures and times may vary depending on the appliance used. Do not apply wax to skin whilst wax is very hot and runny. Only apply wax to skin at about 70 – 75˚C (158 – 167˚F). Do not use wax on sunburnt skin, moles, varicose veins, broken, irritated or inflamed skin.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eKey Ingredients\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eOlive Oil\u003c\/li\u003e \u003cli\u003eSweet Almond Oil\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eRosette Strip Wax\u003c\/strong\u003e\u003cbr\u003eA LYCON legend! This creamy pink classic is exceptional for extra sensitive areas.\u003cbr\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eHow To Use:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eTo heat jar directly in wax heater, remove lid, place jar in heater, heat to 70-75˚C (158 – 167˚F). At this temperature, the strip wax has a consistency like thin honey, which is the proper working consistency for best performance.\u2028800ml jar only: To heat in microwave, loosen lid, heat jar for 1 minute on HIGH. If not sufficiently melted, heat again in 30-second intervals, until wax is at proper working temperature and consistency. Then either place jar directly in wax heater to maintain working temperature, or empty wax into wax heater insert.\u003c\/li\u003e \u003cli\u003eBefore use, test wax temperature on your own arm. If it feels too hot, allow wax to cool before further use.\u003c\/li\u003e \u003cli\u003eCleanse skin with Lycotane Skin Cleanser and allow skin to dry.\u003c\/li\u003e \u003cli\u003eWith spatula at 90° angle to the skin, apply wax firmly in direction of hair growth.\u003c\/li\u003e \u003cli\u003eTo remove wax, bond a waxing strip firmly in sections to the applied wax. One waxing strip can be rebonded to applied wax several times.\u003c\/li\u003e \u003cli\u003eHold skin taut and pull waxing strip off quickly against hair growth.\u003c\/li\u003e \u003cli\u003eRe-apply and remove wax as necessary until all hair has been removed.\u003c\/li\u003e \u003cli\u003eTo finish, apply Lycotane Skin Cleanser to cleanse skin and to close hair follicles.\u003c\/li\u003e \u003cli\u003eApply Tea-Tree Perfect to soothe, protect and moisturise, as well as remove any possible sticky wax residue.\u003c\/li\u003e \u003cli\u003eUse Wax Solvent to clean wax off equipment, furniture, surfaces and clothes.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eWarning:\u003c\/strong\u003e Discontinue use of this product if any adverse skin reaction occurs. Keep away from eyes. If wax enters the eye, flush well with plenty of clean water and seek medical attention if irritation persists. Microwaves have different wattages. It is important to heat wax gradually to avoid wax overheating. If wax is overheated, the plastic jar may also overheat making it difficult to handle. The jar can actually distort and collapse. Do not handle heated jar with bare hands. Do not expose wax to naked flames. Do not heat wax for an extended period of time in jar over 100˚C (212˚F). If using the Lycon Professional Heater, the heat setting should never be over ‘8’. Be aware that heating temperatures and times may vary depending on the appliance used. Do not apply wax to skin whilst wax is very hot and runny. Only apply wax to skin at about 70 – 75˚C (158 – 167˚F). Do not use wax on sunburnt skin, moles, varicose veins, broken, irritated or inflamed skin.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eKey Ingredients\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eRose\u003c\/li\u003e \u003cli\u003eChamomile\u003c\/li\u003e \u003cli\u003eTitanium Dioxide\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eSoyummy Strip Wax\u003c\/strong\u003e\u003cbr\u003eA chocolate treat without the calories! Super gentle and decadent with a chocolate scent.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHow To Use:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eTo heat jar directly in wax heater, remove lid, place jar in heater, heat to 70-75˚C (158 – 167˚F). At this temperature, the strip wax has a consistency like thin honey, which is the proper working consistency for best performance.\u2028800ml jar only: To heat in microwave, loosen lid, heat jar for 1 minute on HIGH. If not sufficiently melted, heat again in 30-second intervals, until wax is at proper working temperature and consistency. Then either place jar directly in wax heater to maintain working temperature, or empty wax into wax heater insert.\u003c\/li\u003e \u003cli\u003eBefore use, test wax temperature on your own arm. If it feels too hot, allow wax to cool before further use.\u003c\/li\u003e \u003cli\u003eCleanse skin with Lycotane Skin Cleanser and allow skin to dry.\u003c\/li\u003e \u003cli\u003eWith spatula at 90° angle to the skin, apply wax firmly in direction of hair growth.\u003c\/li\u003e \u003cli\u003eTo remove wax, bond a waxing strip firmly in sections to the applied wax. One waxing strip can be rebonded to applied wax several times.\u003c\/li\u003e \u003cli\u003eHold skin taut and pull waxing strip off quickly against hair growth.\u003c\/li\u003e \u003cli\u003eRe-apply and remove wax as necessary until all hair has been removed.\u003c\/li\u003e \u003cli\u003eTo finish, apply Lycotane Skin Cleanser to cleanse skin and to close hair follicles.\u003c\/li\u003e \u003cli\u003eApply Tea-Tree Perfect to soothe, protect and moisturise, as well as remove any possible sticky wax residue.\u003c\/li\u003e \u003cli\u003eUse Wax Solvent to clean wax off equipment, furniture, surfaces and clothes.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eWarning:\u003c\/strong\u003e Discontinue use of this product if any adverse skin reaction occurs. Keep away from eyes. If wax enters the eye, flush well with plenty of clean water and seek medical attention if irritation persists. Microwaves have different wattages. It is important to heat wax gradually to avoid wax overheating. If wax is overheated, the plastic jar may also overheat making it difficult to handle. The jar can actually distort and collapse. Do not handle heated jar with bare hands. Do not expose wax to naked flames. Do not heat wax for an extended period of time in jar over 100˚C (212˚F). If using the Lycon Professional Heater, the heat setting should never be over ‘8’. Be aware that heating temperatures and times may vary depending on the appliance used. Do not apply wax to skin whilst wax is very hot and runny. Only apply wax to skin at about 70 – 75˚C (158 – 167˚F). Do not use wax on sunburnt skin, moles, varicose veins, broken, irritated or inflamed skin.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eKey Ingredients\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eIron Oxide\u003c\/li\u003e \u003cli\u003eMicro Mica\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eSoberry Delicious Strip Wax\u003c\/strong\u003e \u003cbr\u003eSmells good enough to eat! Formulated with a delicious strawberry scent. Sparkling pink Micro Mica ensures skin is protected while waxing and no skin drag.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHow To Use:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eTo heat jar directly in wax heater, remove lid, place jar in heater, heat to 70-75˚C (158 – 167˚F). At this temperature, the strip wax has a consistency like thin honey, which is the proper working consistency for best performance.\u2028800ml jar only: To heat in microwave, loosen lid, heat jar for 1 minute on HIGH. If not sufficiently melted, heat again in 30-second intervals, until wax is at proper working temperature and consistency. Then either place jar directly in wax heater to maintain working temperature, or empty wax into wax heater insert.\u003c\/li\u003e \u003cli\u003eBefore use, test wax temperature on your own arm. If it feels too hot, allow wax to cool before further use.\u003c\/li\u003e \u003cli\u003eCleanse skin with Lycotane Skin Cleanser and allow skin to dry.\u003c\/li\u003e \u003cli\u003eWith spatula at 90° angle to the skin, apply wax firmly in direction of hair growth.\u003c\/li\u003e \u003cli\u003eTo remove wax, bond a waxing strip firmly in sections to the applied wax. One waxing strip can be rebonded to applied wax several times.\u003c\/li\u003e \u003cli\u003eHold skin taut and pull waxing strip off quickly against hair growth.\u003c\/li\u003e \u003cli\u003eRe-apply and remove wax as necessary until all hair has been removed.\u003c\/li\u003e \u003cli\u003eTo finish, apply Lycotane Skin Cleanser to cleanse skin and to close hair follicles.\u003c\/li\u003e \u003cli\u003eApply Tea-Tree Perfect to soothe, protect and moisturise, as well as remove any possible sticky wax residue.\u003c\/li\u003e \u003cli\u003eUse Wax Solvent to clean wax off equipment, furniture, surfaces and clothes.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eWarning:\u003c\/strong\u003e Discontinue use of this product if any adverse skin reaction occurs. Keep away from eyes. If wax enters the eye, flush well with plenty of clean water and seek medical attention if irritation persists. Microwaves have different wattages. It is important to heat wax gradually to avoid wax overheating. If wax is overheated, the plastic jar may also overheat making it difficult to handle. The jar can actually distort and collapse. Do not handle heated jar with bare hands. Do not expose wax to naked flames. Do not heat wax for an extended period of time in jar over 100˚C (212˚F). If using the Lycon Professional Heater, the heat setting should never be over ‘8’. Be aware that heating temperatures and times may vary depending on the appliance used. Do not apply wax to skin whilst wax is very hot and runny. Only apply wax to skin at about 70 – 75˚C (158 – 167˚F). Do not use wax on sunburnt skin, moles, varicose veins, broken, irritated or inflamed skin.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eKey Ingredients\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eMicro Mica\u003c\/li\u003e \u003cli\u003eSweet Almond Oil\u003c\/li\u003e \u003cli\u003eTitanium Dioxide\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eWax 'N' Relax Strip Wax\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eEconomical and effective.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eHow To use:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eTo heat jar directly in wax heater, remove lid, place jar in heater, heat to 70-75˚C (158 – 167˚F). At this temperature, the strip wax has a consistency like thin honey, which is the proper working consistency for best performance.\u2028800ml jar only: To heat in microwave, loosen lid, heat jar for 1 minute on HIGH. If not sufficiently melted, heat again in 30-second intervals, until wax is at proper working temperature and consistency. Then either place jar directly in wax heater to maintain working temperature, or empty wax into wax heater insert.\u003c\/li\u003e \u003cli\u003eBefore use, test wax temperature on your own arm. If it feels too hot, allow wax to cool before further use.\u003c\/li\u003e \u003cli\u003eCleanse skin with Lycotane Skin Cleanser and allow skin to dry.\u003c\/li\u003e \u003cli\u003eWith spatula at 90° angle to the skin, apply wax firmly in direction of hair growth.\u003c\/li\u003e \u003cli\u003eTo remove wax, bond a waxing strip firmly in sections to the applied wax. One waxing strip can be rebonded to applied wax several times.\u003c\/li\u003e \u003cli\u003eHold skin taut and pull waxing strip off quickly against hair growth.\u003c\/li\u003e \u003cli\u003eRe-apply and remove wax as necessary until all hair has been removed.\u003c\/li\u003e \u003cli\u003eTo finish, apply Lycotane Skin Cleanser to cleanse skin and to close hair follicles.\u003c\/li\u003e \u003cli\u003eApply Tea-Tree Perfect to soothe, protect and moisturise, as well as remove any possible sticky wax residue.\u003c\/li\u003e \u003cli\u003eUse Wax Solvent to clean wax off equipment, furniture, surfaces and clothes.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eWarning:\u003c\/strong\u003e Discontinue use of this product if any adverse skin reaction occurs. Keep away from eyes. If wax enters the eye, flush well with plenty of clean water and seek medical attention if irritation persists. Microwaves have different wattages. It is important to heat wax gradually to avoid wax overheating. If wax is overheated, the plastic jar may also overheat making it difficult to handle. The jar can actually distort and collapse. Do not handle heated jar with bare hands. Do not expose wax to naked flames. Do not heat wax for an extended period of time in jar over 100˚C (212˚F). If using the Lycon Professional Heater, the heat setting should never be over ‘8’. Be aware that heating temperatures and times may vary depending on the appliance used. Do not apply wax to skin whilst wax is very hot and runny. Only apply wax to skin at about 70 – 75˚C (158 – 167˚F). Do not use wax on sunburnt skin, moles, varicose veins, broken, irritated or inflamed skin.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eKey Ingredients\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eSweet Almond Oil\u003c\/li\u003e \u003c\/ul\u003e \u003cul\u003e\u003c\/ul\u003e","brand":"Lycon","offers":[{"title":"Active Gold \/ 800ml","offer_id":49052769550571,"sku":"1SL0011","price":24.9,"currency_code":"AUD","in_stock":true},{"title":"Aloe Vera \/ 800ml","offer_id":49052769583339,"sku":"1SL0021","price":24.9,"currency_code":"AUD","in_stock":true},{"title":"Apricot \/ 800ml","offer_id":49052769616107,"sku":"1SL0031","price":24.9,"currency_code":"AUD","in_stock":true},{"title":"Azulene \/ 800ml","offer_id":49052769648875,"sku":"1SL0041","price":24.9,"currency_code":"AUD","in_stock":true},{"title":"Lycoflex Vanilla \/ 800ml","offer_id":49052769681643,"sku":"1SL0061","price":27.9,"currency_code":"AUD","in_stock":true},{"title":"Lycotec Superberry \/ 800ml","offer_id":49052769714411,"sku":"1SL0141","price":27.9,"currency_code":"AUD","in_stock":true},{"title":"Lycotec White \/ 800ml","offer_id":49052769747179,"sku":"1SL0151","price":27.9,"currency_code":"AUD","in_stock":true},{"title":"Manifico \/ 800ml","offer_id":49052769779947,"sku":"1SL0161","price":27.9,"currency_code":"AUD","in_stock":true},{"title":"Olive Oil \/ 800ml","offer_id":49052769812715,"sku":"1SL0171","price":27.9,"currency_code":"AUD","in_stock":true},{"title":"Rosette \/ 800ml","offer_id":49052769845483,"sku":"1SL0191","price":27.9,"currency_code":"AUD","in_stock":true},{"title":"Soyummy \/ 800ml","offer_id":49052769878251,"sku":"1SL0211","price":27.9,"currency_code":"AUD","in_stock":true},{"title":"Soberry Delicious \/ 800ml","offer_id":49052769911019,"sku":"1SL0221","price":27.9,"currency_code":"AUD","in_stock":true},{"title":"Wax 'N' Relax \/ 800ml","offer_id":49052769943787,"sku":"1SL0241","price":23.9,"currency_code":"AUD","in_stock":true},{"title":"Nuwoman \/ 1L","offer_id":49052769976555,"sku":"1SZ5241","price":24.9,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/7566\/8715\/files\/lycon-strip-wax-jars_ActiveGoldStripWax.jpg?v=1784088035","url":"https:\/\/discountsalonsupplies.com.au\/products\/lycon-strip-wax-jars","provider":"Discount Salon Supplies","version":"1.0","type":"link"}